Three-Tone Wood Resin and Brass Cabinet Knob

A geometric composition of wood, resin, and brass — cabinet hardware in the Scandinavian register, quiet and precisely made.

Each knob is built in three materials — a section of turned hardwood, a band of smooth cast resin, and a small collar in brass-toned metal — assembled into a clean geometric silhouette. The wood is finished with a natural oil rather than a varnish, so the grain reads honestly; the resin is polished to a smooth matte, and the brass collar catches the light without overpowering.

The three-material composition is the point: a small piece of hardware that carries three different tactile registers at once — warm timber, cool resin, hard metal — inside a silhouette clean enough to sit against modern cabinetry without visual noise. The base is a threaded steel bolt through the brass collar, mounted with a single drill point.

Fit one to a small standalone piece to test the palette, or run a full set across a Scandinavian-toned dresser, wardrobe, or fitted kitchen.

Works well in: a limed-oak Scandinavian kitchen with a bleached-timber counter and a run of open shelves — or a mid-century bedroom with a walnut chest of drawers, a linen headboard, and a woven-rush pendant. Especially good against chalk, warm oak, and soft grey.

Sizing: knob approx. 35mm diameter; total projection around 32mm. Standard M4 25mm bolt supplied — trim to suit thinner cabinet fronts.

✦