Satin Brass Cabinet Knobs, Cup Pulls, D Handles and Backplates, Solid Brass Kitchen Cupboard Hardware (Build Your Own Set)

Solid brass with a brushed satin finish — a soft, low-sheen glow of warm gold, without the mirror shine. Designed in England. Choose any piece and order exactly what you need — knobs, cup pulls, D handles and backplates that all match each other, and match our Satin Brass Collection 1 as well.

Every option is priced individually. Buy one piece, or fit a whole kitchen. The photo changes to show the piece you choose.

Cabinet knobs

Each supplied with a fixing bolt.

• Flat Knob 32mm — flat-topped, 28mm projection
• Flat Knob 38mm — flat-topped, 33mm projection
• Oval Knob & Rose 32mm — 32mm oval on a 35mm rose, 38mm projection
• Oval Knob & Rose 38mm — 38mm oval on a 40mm rose, 44mm projection
• Round Knob 32mm — 32mm ball, 46mm projection, 32mm base
• Ball Knob 32mm — 43mm projection, 15mm base
• Mushroom Knob 32mm — 32mm projection, 13mm stem

The Oval & Rose knobs come with their matching rose (7mm deep). Projection is how far the knob stands off the door.

Cup pulls — 4 inch

• Half Moon — 102 × 52mm, 83mm hole centres
• Stepped Rim — 100 × 47mm, 82mm hole centres
• Scalloped — 4 inch, scalloped cup with three fixing lugs
• Fluted — 100 × 44mm, 82mm hole centres, 30mm projection
• Slim Crescent — 100 × 40mm, 80mm hole centres, 32mm projection
• Classic — 100 × 50mm, 84mm hole centres, 35mm projection
• Deep Scoop — 101 × 36mm, 86mm hole centres, 29mm projection

Hole centres are measured between the two lower fixing holes. Supplied with 20 × 2.7mm countersunk screws (6mm head).

D handles

Supplied with fixing screws.

• 4 inch — 103mm long, 85mm hole centres, 30mm projection
• 5 inch — 130mm long, 103mm hole centres, 35mm projection
• 6 inch — 153mm long, 125mm hole centres, 35mm projection

Backplates

2mm thick, 4mm centre hole.

• Quatrefoil, pierced — 38 × 38mm
• Square Fretwork — 45 × 45mm
• Flower — 51 × 51mm
• Star — 87 × 68mm
• Oblong, rounded ends — 54 × 25mm
• Rectangle — 60 × 25mm

Sits behind any of the knobs above. Sold separately from the knob. The size drawing for each backplate is in the photos. Sizes are measured on the piece — allow up to 1mm either way.

About the satin finish

Satin brass is brushed to a soft, low-sheen glow — warm gold without the mirror shine.

Unlacquered pieces — the Flat, Oval & Rose and Round knobs, and every cup pull and D handle — have nothing sprayed over the brass. Like all real unlacquered brass they slowly mellow and deepen in tone with handling and time. Wipe with a soft dry cloth. Please don't use metal polish on a satin finish — it burnishes the brushed grain to a shine in patches.

Lacquered pieces — the Ball Knob, the Mushroom Knob and all six backplates — carry a clear protective coat that keeps the satin finish as it arrives. Wipe these with a soft dry cloth only; metal polish and abrasives will strip the lacquer.

Made of

Solid brass throughout — not plated, not hollow. Hand-finished.

Please note

Screws are included with the cup pulls and D handles. Knobs come with a fixing bolt. Backplates are sold on their own.

Bun, Victorian, Beehive, Bloxwich and Oval knobs, hinges, pull handles, rosettes and plate cup pulls are in our Satin Brass Collection 1.

The whole range sits in The Windsor Collection.

Shade varies a little between screens.

Dispatched from England.